10
APPROVALS
Hereby, 3M Svenska AB declares that the radio equipment type Radio communication
receiver is in compliance with Directive 2014/53/EU and other appropriate directives to
fulll the requirements for the CE marking. 3M Svenska AB also declares that the PPE
type headset is in compliance with Regulation (EU) 2016/425.
The PPE is audited annually (if Category III products) and type approved by SGS Fimko
Ltd., Takomotie 8, FI-00380 Helsinki, Finland, Notied Body No. 0598.
The product has been tested and approved in accordance with EN 352-2:2002 and EN
352-7:2002 or EN 352-2:2020, EN 352-7:2020 and EN 352-9:2020.
The applicable legislation can be determined by reviewing the Declaration of Conformity
(DoC) at www.3M.com/peltor/doc. The DoC will also show if some other type-approvals
are also applicable.
3M™ Torque™ Eartips and 3M™ CCC-GRM-25 Eartips (disposable)
Clean by wiping with a clean, dry cloth. Replace if the eartip is damaged, detached from
the stem, or if it is not soft and pliable.
Description Product Number 3M ID Part Number
3M
™ PELTOR™ Retention Cord
TEP-CORD 70-0716-7379-5
3M
™ UltraFit™ Communication Tips
Replacement, Large (25 pairs)
370-TEPL-25 70-0716-7374-6
3M
™ UltraFit™ Communication Tips
Replacement, Medium (25 pairs)
370-TEPM-25 70-0716-7373-8
3M
™ UltraFit™ Communication Tips
Replacement, Small (25 pairs)
370-TEPS-25 70-0716-7372-0
3M
™ PELTOR™ Communication Eartip
CCC-GRM-25 70-0716-7521-2
3M
™ Torque™ Eartips (50 pairs)
PELTIP5-01 XH001679626
3M
™ PELTOR™ TEP-200 Replacement
Charging Station Case
TEP-200C 70-0716-5026-4
3M
™ PELTOR™ LEP-200 Replacement Charg-
ing Station Case
LEP-200C 70-0716-7513-9
Replacement Earplug, black TEP-200E 70-0716-7705-1
Replacement Earplug, yellow LEP-200E 70-0716-7704-4
3M
™ PELTOR™ Neckloop
TEP-LOOP-200 70-0716-7703-6
Reorder: Product and Accessories
Replacement eartips are available from 3M. Navigate to 3M.com/PELTOR for addition-
al ordering information. To reorder additional eartips, use 3M ID/product codes.
EN