31
Display text is too light to read • Turn on backlight. See Using the Backlight.
• Adjust the display contrast. See Adjusting the Display
Contrast.
Too many lines
Too many lines for this tape width.
• Reduce the number of text lines.
• Insert a wider tape cartridge.
Barcode not allowed
Barcodes can only be printed on 19 mm and 24 mm tape.
• Replace the tape cartridge.
• Change the tape width.
Printing Self-Lam label not allowed
Self-Lam labels can only be printed on 24 mm Self-Laminated
tape.
• Replace the tape cartridge.
• Change the tape width.
Print error...
The tape is jammed.
• Open the tape cartridge lid and check that the tape is not
jammed.
• Pull a small amount of tape from the cartridge to make sure
the tape moves freely.
No response when pressing keys
One of the keys may be jammed.
• Press each key to determine which key is jammed.
• Press the jammed key firmly until it returns to its normal
position.
Problem/Error Message Solution
To Next Page
Loading...
