3M Quiet SPace - Getting Started; Auto Shut-off Functionality; Bluetooth Pairing and Connection

3
Getting Started
AutoShut-o
Bluetooth
®
/ Audio Input mode:
5 minutes after either Bluetooth
®
or the
audio input is disconnected, the headphone
automatically powers down.
Quiet Space™ mode:
After 4 hours of inactivity in Quiet Space™
mode, the headphone automatically
powers down.
After Auto Shut-o, press and hold the power
button for 3 seconds to turn the headphones on.
Pair Device
In Bluetooth
®
mode, press and hold the
action button for 3 seconds. You will
hear “Bluetooth
®
Pairing.” Make sure your
Bluetooth
®
enabled device is scanning/
searching for devices. Check your device
to make sure it has discovered 3M™ Quiet
Space. Select to connect to the headphones.
AUTO
SHU T- O FF
POWER/
BLUETOOTH
®
POWER/
BLUETOOTH
®
VOLUME
BLUETOOTH
®
PAIRING ON