3M Sarns TCM II - Accessories

21
Maintenance
Accessories
The following accessories are available for use in setting up the SamsTM TCM II and attached equipment for
operation and for use in cleaning the unit.
Size Quantity
Part No.
ARTERIAL HEAT EXCHANGER SUPPLY 16040010 (3M I.D_ No. 78-8066-7416-0)
Water Fitting 1/2 in. (12,7 mm) 2
Barbed Connector 1/2 in. (12,7 mm) 2
Hose Clamps 9
Drainage Line Assembly
Tubing 1/2 in. (12,7 mm) D 1
x 1th. (3,04 m)
Nylon Tee 1/2 in, (12,7 mm) 1
Ball Valve 1/2 in, (12,7 mm) 1
BLANKET SUPPLY 16042010 (3M ID. No. 78-8066—7418—6)
Water Fitting for Out
Water Fitting for In
Barbed Connector
Hose Clamps
1/4 in. (6,4 mm) 1
1/4 in. (6,4 mm) 1
1/4 in. (6,4 mm) 2
5
CARDIOPLEGIA WATER SUPPLY 16041010 (3M ID. Not 78-8066-7417-8)
WaterFttting 3/8 in. (9,5 mm) 2
Barbed Connector 3/8 in. (9,5 mm) 2
Hose Clamps 9
Drainage Line Assembly
Tubing 3/8 in. (9,5 mm) ID 1
x 10 ft. (3,04 m)
Nylon Tee 3/8 in, (9,5 mm) 1
Ball Valve 3/8 in, (9,5 mm) 1
TEMPERATURE DISPLAY MODULE 15746 (3M ID. No. 93-0702-0137—5)
TEMPERATURE PROBE MODULE 15745 (3M ID. No. 98-0702—0136-7)
1 6052010
25324011
25325020
30108113
25612022
14191010
1 6053010
1 61 31 O1 0
25321 02 9
25325020
1 5051 O1 0
2532401 0
25325020
30106093
2561 2021
1 604801 0
3M LD. No.
78-8066—7421-0
26—1008-4365-0
26-1008-4380-9
26-1008—4429—4
26—1 008-43676
78-8066—7165-3
78-8065-7422-8
78-8066-7437-6
26~1 008-1 827-2
26-1008-4380-9
78-8066‘7420-2
2671008—1828-0
26-1008‘4380-9
26-1008-4427-8
26-1008-0549-3
73-8066-7419-4
These modules include directions for installation or replacement by a Certified Clinical Engineer, Biomedical Engineer,
Biomedical Electrical Technician, or those trained to service Sams equipment.
TEMPERATURE PROBES
Any YSl (Yellow Springs Instrument) 400 Series Probe or Sarns equivalent probe.
21
21