EasyManua.ls Logo

3M SCOTT AIR-PAK X3 PRO - Maintenance and Repairs

3M SCOTT AIR-PAK X3 PRO
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 P/N 595360-01 Rev G 202004
and maintain this respirator. Read and understand all instructions before attempting to operate or service this
equipment.
The information in this instruction is meant to supplement — not replace — the instructions, training, supervision,
maintenance, and other elements of your organized respiratory protection program.
Use this respirator only in conjunction with an organized respiratory protection program that complies with the
requirements of the following:
American National Standard Practices for Respiratory Protection, Z88.2, current edition, available from
American National Standards Institute, Inc., 1430 Broadway, New York, NY, 10018
OSHA Safety and Health Standard 29 CFR 1910, Paragraph 134, available from the US Department of Labor,
Occupational Safety and Health Administration
Other pertinent nationally recognized standards, such as those of the US Coast Guard or the Department of
Defense
This product is designed and intended to function properly in reasonable/ordinary firefighting conditions. The
functionality of this product may be compromised by extreme fire conditions.
Training is required before use of this respirator. Use this respirator only if you have been trained in its use and
only in conjunction with an organized respiratory protection program. Do not use this respirator for purposes
other than those authorized by your respiratory protection program. Do not use this respirator underwater.

Other manuals for 3M SCOTT AIR-PAK X3 PRO

Related product manuals