DETACHING THE SHOULDER HARNESS AND WAIST PAD
P/N 595360-01 Rev G 202004 27
6 Unsnap the 2 regulator hose retaining straps. See Figure 2-5.
Figure 2-5 Unsnapping the regulator hose retaining strap
7 Detach the waist-to-shoulder straps from the buckles at the bottom of the shoulder harness. See Figure 2-6.
Figure 2-6 Detaching the waist-to-shoulder straps
8 Flatten the upper metal slide at the base of the drag rescue loop and pull the slide through the upper slot of the
clevis (metal connector at the top of the backframe). See Figure 2-7.
Figure 2-7 Pulling the upper metal slide through the clevis
Lower regulator
hose retaining strap
Upper
metal
slide
Clevis
Pull the metal
slide through the
clevis
To Next Page
Loading...
