SOFT GOODS ASSEMBLY & DISASSEMBLY
30 P/N 595360-01 Rev G 202004
3 Unsnap the waist pad retaining strap using either of the following methods:
• Method 1: Unsnap both ends to fully remove the waist pad retaining strap from the waist pad.
i Locate the two snaps securing the ends of the waist pad retaining strap to the waist pad.
ii Insert one or more fingers between the two snaps at each end and pull up to unsnap. See Figure 2-11.
Figure 2-11 Unsnapping one end of the waist pad retaining strap
iii Slide each end of the waist pad retaining strap through the sewn loop of the waist pad. See Figure 2-12.
Figure 2-12 Sliding the waist pad retaining strap through the waist pad loop
iv Fold the waist pad away from the backframe.
NOTE
The snaps attaching the waist pad retaining strap to the waist pad are directional snap fasteners. To open
(unsnap), lift the edge with the dot. Do not use a tool or excessive force to engage or disengage the snaps.
Waist pad retaining strap
To Next Page
Loading...
