ATTACHING THE SHOULDER HARNESS AND WAIST PAD
P/N 595360-01 Rev G 202004 33
Figure 2-17 Feeding the waist-to-shoulder strap through the backframe slots.
c Tug on the waist-to-shoulder strap to ensure a secure attachment.
d Repeat steps a-c for the other waist-to-shoulder strap.
2 Feed one end of the waist pad retaining strap through the backframe opening with the fasteners facing up. See
Figure 2-18.
Figure 2-18 Installing the waist pad retaining strap to the backframe
TIP
Figure 2-18
shows installation of the waist pad retaining strap after unsnapping both ends from the waist
pad. You may have chosen to unsnap only 1 end of the waist pad retaining strap, leaving the other end
attached to the waist pad.
Feed strap through
backframe slot
Tri-slide is flush against the
backframe
To Next Page
Loading...
