3M Steri-Vac GS Series - 10. Using the Touch Screen; 10.1. Main Screen; 10.2. Menu

16
3M
™
Steri-Vac
™
Sterilizer /Aerator GSSeries – Operator’sManual
10. Using the TouchScreen
10.1. MainScreen
Figure 8shows the Main Screen of the 3M™Steri-Vac™ Sterilizer/Aerator GS Series that appears after the power cyclesON. A double door sterilizer will have an additional button on the Main
Screen for the option to open the Unload door.
The Operator controls the 3M™ Steri-Vac™ Sterilizer/Aerator GS Series via a touch screen. A fingertip, stylus, ball tip pen or a computer mouse can be safely used to navigate the touch
screens. To use a computer mouse, simply plug the mouse into one of the two USB ports (reference Figures 6 and 7) and the mouse arrow will appear on the touch screen.
Sterilizer
22.2
˚
C
98.0
kPa
38 °C
Open door
Menu
Menu
Select cycle temperature:
55 °C
04/20/2015
05:19:51
65432
1
7
Figure8.
GS Series Sterilizer MainScreen
10.2. Menu
The Menu button in the bottom left hand corner is used to access the following options: Reports, Cycles, Setup, Status and Service. Figure 9shows the Menu optionsscreen.
Sterilizer
22.2
Select cycle temperature:
˚
C
04/20/2015
05:19:52
65432
1
7
98.0
kPa
Reports
Cycles
Setup
Status
Service
55 °C38 °C
Figure9.
GS Series Sterilizer MenuOptions