3M Steri-Vac GS Series - 11.2. Packaging Medical Devices

28
3M
™
Steri-Vac
™
Sterilizer /Aerator GSSeries – Operator’sManual
10.6. Status
The Status button provides information on the current functional state of the 3M™Steri-Vac™ Sterilizer/Aerator GS Series. The Status option provides viewing access to three features; Control,
Info and Log. These features are primarily used by 3M Health Care service personnel or authorized 3M service personnel. Figure32illustrates the location of the Statusbutton.
Sterilizer
22.2
Select cycle temperature:
˚
C
04/20/2015
05:19:52
65432
1
7
98.0
kPa
Reports
Cycles
Setup
Status
Service
55 °C38 °C
Figure32.
StatusButton
10.6.1. Control
The Control tab of the Status option provides information on the current state of the 3M™Steri-Vac™ Sterilizer/Aerator GS Series sensors, valves and softwareconditions.
10.6.2. Info
The Info tab of the Status option provides version numbers for 3M™Steri-Vac™ Sterilizer/Aerator GS Series components andsoftware.
10.6.3. Log
The Log tab of the Status option provides ongoing output of the software commands while the 3M™Steri-Vac™ Sterilizer/Aerator GS Series is running a cycle. The Log is not saved and is
overwritten as new data informationappears.