3M Steri-Vac GS Series - Page 55

53
Steri-Vac
TM
Sterilizer GS5-1D
Serial number:
Software version:
Facility:
Sterilizer ID:
Start time:
Cycle count:
Cycle name:
Operator ID:
Load ID:
EO cartridge lot:
AA121212
1.0.1
City Hospital
Machine 2
04/20/2015 05:27:42
33
55° C
LMT
120413-1
2017-02AB
Figure61.
Verifying Cycle Report –Header
WARNING: To reduce the risks associated with fire andexplosion:
Inspect the display screen and cycle reports for errors and listen for audible notifications (if enabled). Always take action for errors as indicated in thismanual.
CAUTION: To reduce patient risks associated with exposure to potentially non-sterile devices or inadequate sterilizationprocedures:
Inspect the display screen and cycle reports for errors and listen for audible notifications (if enabled). Always take action for errors as indicated in thismanual.
Always inspect cycle reports (printout or electronic file) to ensure the Operator’s programmed parameters or the device manufacturer’s instructions for use (IFU)matches:
• %RH at the End ofConditioning,
• Temperature at the End ofConditioning,
• Actual Gas ExposureTime.
Always follow device manufacturer’s instructions for use (IFU), including device cleaning, drying, packaging, sterilization, andaeration.
Cycle complete
No errors
No cautions
End time: 04/20/2015 21:03:12
59%
55.0° C
1:00 hh:mm
12:00 hh:mm
15:30 hh:mm
RH end of
conditioning:
Temp end of
conditioning:
Actual expose time:
Actual aeration time:
Total cycle time:
Reviewed by & date:
0
15 21:03:12
omplete
Final StatusConfirmation
Temperature End ofConditioning
%RH End ofConditioning
Actual EO Gas ExposureTime
Actual AerationTime
Figure62.
Verifying Cycle Report -
F
ooterInformation