3M Steri-Vac GSX Series - 15�3� Preventative Maintenance

80
3M
™
Steri‑Vac
™
Sterilizer / Aerator GSXSeries – Operator’sManual
15.3. PreventativeMaintenance
Performing preventative maintenance, at scheduled intervals, is a critical part of ensuring the 3M™Steri‑Vac™ Sterilizer/Aerator GSX Series continues to function
properly� Complete maintenance at routine scheduled intervals of a maximum of every six (6) months� A wrench icon will appear on the display screen when
maintenance is due (Figure94)� There are no user‑serviceable parts; use only 3M Health Care service personnel or authorized 3M service personnel formaintenance�
Sterilizer
22.2
˚
C
98.0
kPa
Open door
Menu
Menu
04/20/2015
05:19:51
65432
1
7
Select cycle:
GSX 38C
GSX 55C
Wrench Icon Preventative Maintenance isDue
Figure94.
Wrench Icon ‑ Preventative
Maintenance isDue
It is the user’s facility management’s responsibility to complete appropriate decontamination in case of spillage of hazardous material on or inside of the equipment. Reference the appropriate
Safety Data Sheet (SDS) for decontamination procedures. If there are questions regarding the appropriate cleaning procedures and/or cleaning agents, contact your local 3M Health Care service
personnel or authorized 3M servicepersonnel.