6
3M™ Service Vacuum Operating Instructions © 3M 2008
3M™ Dusting Brush, Static
Dissipative (SV -DBSD1)
80-6104-7960-4. Used for applications
involving static sensitive electronic
components (such as circuit boards) to
prevent static buildup.
3M™ Crevice Nozzle, Static
Dissipative (SV-CN1)
80-6104-7958-8. Used for general
cleaning of loose materials in
accessible areas. Prevents static
buildup.
3M™ Crevice Brush (SV -CB1)
80-6104-7957-0. Used with crevice
nozzle for general cleaning where a
brush is needed to loosen foreign
material. (NOT static dissipative.)
3M™ Cur ved W and Nozzle, Static
Dissipative (SV-WA2)
78-8063-1540-0. Used for general
cleaning on hard to reach areas. Static
dissipative properties prevent static
buildup.
3M™ Needle Nose Nozzle, Static
Dissipative (SV-NN)
78-8079-9435-1. Used primarily for
cleanign circuit boards. Needle nose
design permits cleaning in very small
areas, and static dissipative properties
prevent static buildup.
3M™ Stretch Hose, 32-Inch (SV -SH32)
78-8063-2418-8. Used for general
applications. Stretches to
approximately 10 feet.
3M™ Stretch Hose, 50-Inch (SV -SH50)
78-8068-5818-5. Used where vacuum
cannot be brought close to the object
or area being cleaned.
403248 12/21/07 10:33 AM Page 8
3M™ T ype 1 Filter , Fine Particle
(SV-SPF1)
78-6969-6211-3. A thinner, more
concentrated weave (HEPA media) for
trapping extremely fine particles to 0.3
microns. Typical applications are color
laser printers, color copiers and highly
sensitive equipment. (Disposable)
3M™ T ype 2 Filter , T oner/Dust
(SV-MPF2)
78-8005-5350-1. Specifically designed
for trapping unwanted toner from
copiers and laser printers. Also ideal
for cleaning data processing equipment.
(Disposable)
To Next Page
Loading...