CP202-2CI
CAN Server
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【Package checklist】
Please check the integrity of package and accessories while
first using the switch.
1. CAN server X1 (with wiring terminal block)
2. Certification 3. Wall mounting accessories
4. Manual 5. CD
6. Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it asap.
【Products Overview】
CP202-2CI is a CAN server, the model is CP202-2CI (2-way
CAN bus ports to 1-way 10/100 Base-T(X) converter).
【Panel design】
Front view
Left view and right view
1. CAN status indicator CAN1
2. System running indicator RUN
3. Network connection indicator LINK
4. Lugs
5. CAN status indicator CAN2
6. Indicator ERR2
7. Indicator ERR1
8. Ethernet RJ45 port
9. Restore default settings DEF
10. Power input terminal block
11. CAN wiring terminal block
【Mounting Dimension】
Unit (mm)
【Wall-mounted Device Mounting】
Step 1 Place the CAN server on the wall as reference or
reference installation dimension; label the bolt
position on the wall.
Step 2 Hang the CAN server on the labeled wall; align the
bolt to the labeled position, then screw the bolt to
enhance stability, installation ends.
Note:
1. Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
2. Before power on, first confirm the supported power
To Next Page
