3Pod V3AH User Manual

YOUR POINT OF VIEW
DISCOVER
key Features
Fig 1:
Fig 2: Remove Quick-Release Plate
On uneven surface, adjust the ball level locking knob to
balance the head. Retighten the ball level lock.
Fig 3: Ball Level
Release tilt locking knob, and move the head up or down to tilt.
Retighten the tilt lock.
Fig 4: Tilt
Release the pan lock and move the head left or right to pan.
Fig 5: Pan
The legs can be held together by xing the transport clip.
Fig 6: Lock Legs
V3AH
Video Tripod
USER MANUAL
2
UNC1/4"
Camera Screw
3
5
4
1
Quick-Release
Plate
Safety Button
Tilt Locking
Knob
Pan Locking
Knob
Legs
Mid-Level
Spreader
Tilt Bar
Leg Flip-Locks
Ball Level
Locking Knob
Retractable
Spiked Feet
8
7
9
10
1. To release quick-release plate, rotate the plate
locking knob as illustrated.
2. Press the safety button, and then remove the plate.
3. Wide-bodied plate design can improves the stability of vedio camera.
This video tripods offer screw-in rubber feet and stainless
steel spiked feet.
Fig 7: Retractable Spiked Feet
The tilt bar can be installed on the left or right by releasing the
knob as illustrated. Retighten the knob.
Fig 8: Tilt Bar
To spread the tripod to the full extension
of the mid-level spreader.
Fig 10: Mid-Level Spreader
Release ip-locks and extend the legs to desired
height and retighten the ip-locks.
Fig 9: Leg Length Adjustment
6
Transport Clip

3Pod V3AH Specifications

General

Brand	3Pod
Model	V3AH
Category	Camera Accessories
Language	English

Summary

V3AH Video Tripod Features and Operation

Key Features and Components

Diagram identifying major parts like quick-release plate, tilt bar, and leg locks.

Quick-Release Plate Handling

Instructions for releasing and detaching the quick-release plate from the tripod head.

Head Movement and Adjustment

Guidance on balancing the head using the ball level and performing tilt and pan movements.

Legs and Stability Features

Details on locking legs, retractable spiked feet, leg length adjustment, and mid-level spreader.