3TECH USC-2.5L - Page 17

16
4.1. Regarding 5 digital time choosing
ON
OF
F
SE
T
TC
18
0
It will automatically display 180s, it is the most common cleaning
time. Pressing ON starts cleaning. The time displayed is the time left.
When the time “000” is displayed, the unit will automatically stop.
ON
OF
F
SE
T
TC
280
Every time you press “SET”, it will change and display another time
selection.
It is usually used as the fi rst step cleaning of the instrument. The
cleaning will take longer if the fi lth stayed for a long time on the item.
ON
OF
F
SE
T
TC
380
Usually used for cleaning several products together. Choose this to
shorten the cleaning process.
ON
OF
F
SE
T
TC
480
This time display is usually used to clean greasy metal parts, this time
choosing, using the heater function. This function can soften the oils
to increase the cleaning result.
ON
OF
F
SE
T
TC
090
This step is usually taken after fi nishing the above steps, but the
water in tank is dirty, replacing with clean water and then cleaning
another 90s to keep clean of the product’s surface.