• Suitable for garages with up to 2 spaces
• Pulling force 600 N
• Door sizes up to 12m
2
• Opening speed max. 135 mm/sec.
• Plus optional battery back up
The GA103 garage door operator is loaded with technical innovations.
The second opening height is a standard programmable feature, and the
opening power is 600 N. Owners can also expect the highest level of security
and user safety, along with a 2 Year warranty.
All units are TUV tested and exceed or surpass the most stringent industry
requirements for reliability and performance.
HOW TO PROGRAM
A REMOTE
GA
103
Press and hold button 1
Press the button on the remote
you want to program
Let go (release) both buttons
1
1
2
2
T
T
HOW TO SET LIMITS AND FORCE
A. Make sure the door is connected to the motor
B. Turn the power off to the motor
C. Press and hold the T button
D. Turn power supply back on while still pressing the T button
E. Keep holding T button 5 seconds minimum
F. Release T button
G. Press T button momentarily and release
H. Door will perform 4 - 5 test operations automatically
I. Door now should work correctly
To Next Page
