1, INTRO
4. Perform a zero offset (some units refer to this as calibration).
Refer to Section 3 for full instructions.
(a) Unclip and dismount. Hold the bike upright and stationary, and position the crank
arms at 12 and 6 0'clock, with the non-drive side crank arm down.
(b) Select "Zero" or "Calibrate" on your display unit.
3
DRIVE SIDE
NON-DRIVE SIDE
6
ZERO-OFFSET
CALIBRATE
5. Connect to the Apple Find My app (Android users skip this step)
Refer to Section 5 for full instructions.
(a) Remove and reinstalling the battery on your PRECISION 3+ Powermeter three
times (x3) to trigger Apple Find My pairing mode.
(b) From the Apple Find My app, add your PRECISION 3+ Powermeter.
Works with
Apple Find My
Download on the
App Store
4iiii
To Next Page
Loading...