2, PAIRING
Compatible display units
To view and record power and cadence data from your power meter, pair it with a
compatible head unit or smart watch. Compatible devices pair with your power meter
using one of the following protocols:
• Bluetooth
. ANT+
Consult the head unit or watch manufacturer for compatibility and pairing instructions.
Pair with a display unit over ANT+
2.3
Pairing steps vary between display units. Consult your display unit's user manual for
specific instructions.
The following are generic instructions for ANT+ enabled display units:
5
1.
2.
3.
4.
5.
Turn on your display unit.
Spin the crank 3-4 times to wake up your power meter.
Navigate to the "sensors" menu on your display unit.
Add a new sensor.
Select only your power meter ANT+ ID from the list of available devices and connect.
Tip: Your power meter's ANT+ ID is etched on the side of pod.
Once paired, most display units will remember your power meter and automatically
connect when both devices are on.
POWER METER METRICS
Additional power metrics can be added to your display unit's workout screen. Consult the
display unit's User manual for instructions. Fields that are available on many display
units include:
•Power (1 sec. 3 sec. 10 sec.)
•Normalized Power
•Intensity Factor
•TSS (training stress scores)
•Power Balance (dual power meters only)
•Cadence
4iiii
To Next Page
Loading...