Function Introduction:
1. 3.5mm TRS/TRRS Monitoring Port:
Plug in 3.5mm TRS/TRRS headphones to monitor; When monitoring in Stereo mode, A is the left
channel and B is the right channel
2. 3.5mm TRS Audio Output Port:
Output a mixed audio track in Mono mode; Output two independent audio tracks in Stereo mode;
Output two mono audio in Safety mode: One is normal audio, and the other is safe audio reduced
by -6dB on the basis of normal audio
3. A/B Channel Output Volume Control Button:
Short press to cyclically adjust the A/B channel output volume. In the mono mode, the A/B channel
output volume is adjusted synchronously
4. USB-C Charging/Output Port:
Connect the receiver and the corresponding device through the 3-in-1 charging/output cable for
charging or digital output
5. Power/Mono/Stereo/Safety Mode Switch Button:
Long press for On/O; Short press for Mono/Stereo/Safety mode switch; It can not realize STEREO
function when in single-channel and safety mode
6. Reset Hole:
If there is an abnormal phenomenon such as the device is crash or unable to turn on, insert the
reset pin into the reset hole to reset it
7
To Next Page
Loading...
