8BITDO Arcade Stick User Manual

Manuals+
User Manuals Simplified.
8BitDo Arcade Stick for Switch and Window Instruction Manual
Home » 8Bitdo » 8BitDo Arcade Stick for Switch and Window Instruction Manual
Arcade Stick – instruction manual
(1)- mode switch
uSwitch
off
X-input
(2) – control stick switch
left stick
d-pad
right stick
(3) – pair button
(4) — turbo button
(5) — home button
(6) – P1 / P2
(7)— led lights (;)
(8) — connection switch
Bluetooth L 2.4g
(9) – select / — / view
(10)- start / + / menu
(11)– joystick
Switch
motion controls, NFC scanning, IR camera, HD rumble, notification LED are not supported, nor can the system be waken up wirelessly
2.4g connection
1. put the connection switch to 2.4G
2. turn the mode switch to S mode, LEDs start to blink
3. plug the receiver into the USB port on Switch. Arcade stick will auto-connect to the receiver
4. LEDs on both the arcade stick and receiver will become solid when the connection is successful
Press the home button to continue to use the arcade stick when it is already on S mode
The switch system needs to be 3.0.0 or above for a 2.4g connection. Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication

8BITDO Arcade Stick Specifications

General

Product color	Gray
Battery type	Built-in
Power source	Cable/Battery
Battery capacity	1000 mAh
Built-in battery	Yes
Battery life (max)	40 h
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Y
Device type	Joystick
Gaming control technology	Analogue / Digital
Gaming platforms supported	Nintendo Switch, Nintendo Switch Lite, PC
Gaming control function buttons	-
Frequency range	2.4 GHz
Device interface	Bluetooth/USB
Bluetooth version	4.0
USB connector type	USB Type-C
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	203 mm
Width	303 mm
Height	111.5 mm
Weight	2100 g