a/d/s/ 236is - User Manual

Guide on how to best use the manual and seek dealer assistance if needed.

Important advice and safety precautions for installation and operation.

Guidance on planning the installation for optimal system performance and reliability.

Specifies minimum and maximum amplifier power recommendations for the loudspeakers.

Discusses general tips and considerations for choosing optimal tweeter mounting locations.

Details the available controls and how to connect the speakers to the amplifier.

Explains the 3-position switch for adjusting tweeter volume relative to the midrange.

Instructions for connecting speaker wires to the amplifier via crossover terminals.

Guidance on selecting wire and ensuring correct polarity and phasing for optimal performance.

Details the spade lug connectors used for woofer electrical connections.

Explains how to connect wires to the bare wire termination of the tweeter.

Steps for preparing and installing the woofer, including hole cutting and wiring.

Procedures for securely attaching the woofer, ensuring an airtight seal and proper screw torque.

Information about the speaker grille and its mounting components.

Instructions for preparing the mounting surface for surface-mounted tweeters.

Details for flush mounting tweeters, including depth and cutout size requirements.

Guidance for installing tweeters where the rear of the mounting surface is inaccessible.

How to connect wires and attach the tweeter module to the mounting cup.

Explanation of bi-wiring and bi-amping techniques for enhanced system performance.

Instructions for mounting the crossover unit securely to a flat surface.

Routing and connecting wires from the amplifier to the crossover network inputs.

Specifics for connecting separate amplifiers to high and low frequency crossover sections.

Steps for making final connections, including stripping wire and securing terminals.

Instructions for setting up bi-wired connections, including cutting jumpers.

Diagnosing and resolving issues where no sound is produced from the speakers.

Identifying causes and solutions for distorted or clipping audio output.

Troubleshooting reasons for inadequate bass performance.

Addressing issues related to poor stereo imaging or separation.

Diagram showing the pinout for woofer and tweeter connections.

Detailed technical specifications for the 234is, 235is, and 236is models.

Technical data for the crossover network, including dimensions.

Essential Thiele-Small parameters for the woofer/midrange transducers.

Steps to take for warranty service, including keeping receipts and dealer information.

Details the terms and conditions of the product's limited warranty coverage.

Information on conditions that void the product warranty.

Provides factory contact information for customer service inquiries.

Details about the manufacturer, including name and address.

Statement of compliance with specified European standards for the product.

Contact details for the authorized European representative.