A.I.&.E FS40-E - General Safety Instructions; Key Safety Precautions

A ELECTRIC FAN
A) Front guard
B) Rear guard
C) Motor housing
D) Fan oscillation button
E) Fan pitch-adjustment clamp
F) Fan blades
G) Control panel
H) Tightening clamp (at rear)
I) Extendable shaft
J) Fan height-adjustment collar
K) Upper base shaft
L) Base cover
M) Base leg section (x2)
N) Power cable
GENERAL SAFETY INSTRUCTIONS
- Do not connect the fan to the power supply until the fan has been FULLY assembled.
- Do not connect the fan to any power supply other than 230 V / 50 Hz.
- Unplug the fan before adjusting it in any way
.
- Never operate the fan if it has damaged or worn parts. In such circumstances, it
VKRXOGEHKDQGHGRYHUWRWKHPDQXIDFWXUHUWKHLUVHUYLFHDJHQWRUDVLPLODUO\TXDOL¿HG
person for repair.
- Always position the fan on a stable and level surface.
- Do not spray anything into the fan.