User Manual FOX 514
September 2021
File: User Manual_FOX 514_rev3 38
6.11 Power Save
After 5 minutes of inactivity the FOX 514 automatically goes to Power save mode to save power.
• The dipslay gets dark
• The green status LED indicates with 1 Hz
To “wake up” the laser just touch the screen or one of the keys.
Additionally, the automatic shut down time can be set manually. For that, use the shut down
button in the settings. The automatic shut down time can be set between 10 and 100
minutes. After reaching the set time, the device has to be restarted.
6.12 Charging the battery
Insert the Power supply into its socket at the rear panel of the FOX 514.
The charging process starts, as soon as the orange LED shows up.
There is no need to switch the FOX 514 on when charging. The battery also
charges when the device is switched off.
As soon as the battery is completely charged, the orange LED will switch off and the green
LED will shine on.
To Next Page
Loading...