A.R.C. Laser FOX 514 - Error Messages; Warning Messages

User Manual FOX 514
September 2021
File: User Manual_FOX 514_rev3 45
8.5.3 Error Messages
State of charge of battery
too low
Batteries need to be charged
before continuing operation
Door interlock missing
Connect the interlock plug
included with the system
Temperature too low
The environment is too cold
for operating the laser
Operating temperature too
high
Please wait until laser cools
down to reach a working
temperature
Air humidity too high
The laser should not be
operated in this environment
Fiber missing / or plugged
in incorrectly
Check fiber plug
Ventilation blocked
Contact your A.R.C. Laser
agent.
8.5.4 Warning Messages
Foot switch pressed
Change power supply