User Manual FOX 514
September 2021
File: User Manual_FOX 514_rev3 46
8.5.5 Status Messages
The TFT-Display and Fiber-
LED are getting dark and the
green Status-LED starts
blinking.
PowerSave Mode - Your FOX 514 laser lowers its power
consumption. By pressing any button you can resume to normal
mode.
The TFT-Display, Fiber-LED,
Status LED are dark
Laser-STOP button is pressed. Pull up Laser STOP button, and
the device can be started.
8.6 Disposal
The relevant, locally applicable laws and regulations must be observed
during disposal. Under no circumstances should the device be disposed of
with domestic waste.
A.R.C. Laser GmbH is happy to assist with the disposal of the system; Costs
for the proper return of the laser to A.R.C. Laser GmbH is within the
responsibility oft he buyer. Please contact our service
To Next Page
Loading...