User Manual FOX 514
September 2021
File: User Manual_FOX 514_rev3 6
Das Bi ld ka nn zurz eit
nich t ang eze igt
wer de n.
1 Introduction
We are pleased that you have chosen our FOX 514 laser and wish you success in using this
versatile laser system.
The FOX 514 laser generates a laser beam of high intensity, which can cause injuries if
handled improperly. The user manual should therefore be read carefully before starting up
the device. If you have any further questions regarding the safety or the use of the device or
regarding the laser and laser radiation, please contact A.R.C. Laser GmbH.
1.1 Marking and Symbols
The symbol "Attention" is attached to all surfaces that mean danger to the user.
Before carrying out any further work on such marked parts, the operating
instructions should be consulted or the service of A.R.C. Laser GmbH should be
contacted.
The symbol "Attention laser radiation" is intended to warn the user against
directing laser beams to unwanted areas through improper handling or improper
operation of the device.
To Next Page
Loading...