A.R.I. S-050 User Manual

12
IOM S-050
5.2.3. Cleaning of the Air Valve
• Thoroughly wash and clean the air valve components under clean running water to remove all grime; Pay special
attention to the internal parts.
• Using the roll pin punch [1], push the Inlet Filter out of the Base [2], [3]. Thoroughly wash and clean it, then
reassemble it [4], [5]. Make sure that the Filter is seated correctly in the Base [6].
1
2
3
4
5
6

A.R.I. S-050 Specifications

General

Brand	A.R.I.
Model	S-050
Category	Control Unit
Language	English