10
Owner`s manual
5.4 Installing pedals
The pedals on the A2B Kuo+ arrive fully fitted and functional
To fold the pedals:
1. Hold the bike secure and upright and press the outside of the
pedal in direction of the bike.
2. The pedal will then depress, enabling you to fold the pedal to the
left or to the right.
3. To open the pedal. Press again the pedal towards the bike and
then move the pedal through 90 to the central open position.
4. Ensure that the pedals are locked tight before attempting to ride
the bike.
An improperly opened pedal may fold close whilst in use.
This may cause an accident resulting in serious injury or death and
property damage. Ensure that your pedals are properly unfolded
and clicked into place before each ride.
5.5 Brake lever adjustment
Can you comfortably operate the brakes? If not, take your A2B
Kuo+ to your A2B dealer and ask them to adjust the angle of the
brake levers.
To Next Page
Loading...
