.....
.
:1·
iii·'
iii
II ii
AALBORG
INDUSTRIES
I
PRESSURE
JET
BURNER,
TYPE
KBO-E
S05560_12#F.1
Pressure
jet
burner, type KBO-E
1
19-2
1.:1
Burner
descrilPtion
The KBO-E burner is a pressure
jet
burner
of
the monoblock type designed for mod-
ulating operation.
It
is capable
of
burning marine diesel oil,
MDO
with a viscosity
of
min. 4 cSt. at 20
o
e.
Marine gas oil with a viscosity
of
min.
1.5
cSt. at 40
o
e.
And heavy
fuel oil HFO, with a viscosity
of
max. 700 cSt. at
SO°C.
All internal pipes are traced.
The design
of
the burner makes installation, adjustment and servicing easy. Further-
more, it ensures that the flame is kept highly stable at all loads. An illustration
of
the
KBO-E burner is shown in Figure I.
Illustration
of
the pressure
jet
burner,
type KBO-E
Figure 1
kbo-ex1301530en.jpg
The burner housing is
~ounted
on the boiler front with a hinged flange that can be
turned either to left or right. In case
of
burner swing out during operation a micro switch
stops the burner.
The electrical fan motor
is
fitted on the side
of
the housing and
is
directly connected
to the fan wheel. A pressure switch monitors and secures against too low combustion
air pressure.
In
case
of
too high oil pressure after the oil regulator a pressure switch
shuts down the burner.
A combustion head and diffuser disc are placed
in
front
of
the nozzle with the purpose
of
mixing air and oil mist into a suitable mixture.
Language
UK
To Next Page
General