To Next PageTo Next Page
Need help?Do you have a question about the Aardvark VANSAT Raven and is the answer not in the manual?
DC voltage and amp draw during operation and search.
KU Band LNB type, polarity, LO Freq, and dish details.
Folded/raised dimensions and rooftop unit weight.
Gear boxes, wiring loom length, and mounting plate.
Multi-satellite, adaptive search, upgradable firmware.
30-70 degrees for full Australia coverage.
System is compliant with DVBS1 and DVBS2 standards.
Clear space calculation for dish rotation and elevation.
Manufactured in Europe, assembled/tested in Australia, 2-year warranty.
Crucial safety instructions for transporting and handling the rooftop mechanism.
Choosing a flat, level area on the roof for mounting.
Locating the junction box away from the rotating mechanism.
Drilling a hole for the wiring loom and avoiding permanent sealing.
Flush mounting or free standing, avoiding ventilation blockage.
Connecting coax cables to ANT IN, avoiding signal degradation.
Wiring for 12V/24V DC: RED (+), BLACK (Ground), BLUE (Ignition).
Ensure dish clearance and clear sky view before powering on.
Powering on the unit, selecting input, and initiating dish search.
Using the remote control for system operations.
Choosing desired satellites (e.g., Optus C1) for reception.
Connecting external decoders via coax and to the TV.
Using HDMI or AV cables for superior picture/sound quality.
Safely lowering the dish for travel and visual confirmation.
Contacting provider for terms on using service while travelling.
Optional manual adjustment of LNB twist for alignment.
Using INFO button to view mechanical and electronic positioning values.
Restoring the system to default settings, caution against backing up user settings.
Pausing rotation, freezing picture, and accessing retro games.
General