54 Model 53i IP Phone User Guide
Line Keys and Programmable Keys
Configuring an Automatic Call Distribution (ACD) Key
Use the following procedure to configure ACD on the 53i IP Phone.
1. Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
2. Select a "Key 3" through "Key 6".
3. In the "Hard Key" field, select Automatic call distribution.
4. In the "Line" field, select a line to apply Automatic call distribution. Valid values
are 1 through 9.
5. Click to save your changes.
Aastra Web UI
Note: It is recommended you configure no more than a single ACD program-
mable key or Expansion Module key per IP phone.
To Next Page
Loading...
