Model 55i IP Phone User Guide 99
Line Keys, Programmable Keys, and Softkeys
Setting Services Key
Use the following procedure to configure a Services key on the 55i IP Phone. The
procedure shows the programmable key screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
2. For softkeys, select from "Key 1" through "Key 20".
or
For programmable keys, select from "Key 1" through "Key 6".
3. In the "Type" field, select Services.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Line" field, select the line you want to apply to this key. Valid values are 1
through 9.
6. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
7. Click to save your changes.
Aastra Web UI
Note: By default, Key 1 on the top set of programmable keys is configured for
Services.
To Next Page
Loading...
