Aastra 6730I - Page 266

Operational Features
5-25 41-001343-02 REV05 – 07.2014
Setting Time Server Using the Configuration Files
Use the following procedure to enable/disable the Time Server and optionally set the IP Address of Time Servers 1, 2,
and/or 3.
Setting Time Server Using the IP Phone UI
Use the following procedure to set the Time Server and optionally set the IP Address of Time Servers 1, 2, and/or 3.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Time Server Settings” on pageA-45.
IP Phone UI
Enable/the Time Server by specifying Time Server 1, 2, and/or 3:
1.
Press on the phone to enter the Options List.
2. Select Preferences->Time and Date.
3. Select Timer Server 1, Time Server 2, and/or Time Server 3.
4. Enter the IP address of the Time Server, in dotted decimal format. Use the available softkeys to help you enter the information.
5. Click Done to save your changes.
For the 6739i:
1.
Press on the phone to enter the Options List.
2. Press Set Time.
3. Press Timer Server 1, Time Server 2, and/or Time Server 3. A text box displays.
4. Press the text box and enter the IP address of the Time Server, in dotted decimal format using the keyboard that displays.
5. Press Enter to save your changes.
6.
Press the to return to the previous screen.
7.
Press the button or the button at any time to return to the idle screen.
For the 6867i:
1.
Press to enter the Options List.
2. Select Time and Date -> Set Date and Time.
3.
Ensure there is a checkmark in the box corresponding to the Use Network Time setting. If there is no checkmark, press the button to
enable the Use Network Time setting.
4.
Press the
2 key to highlight Time Server 1, Time Server 2, or Time Server 3.
5. Using the keys on the dialpad, enter an IP address or domain name for the time server.
6. Press the Save softkey to save your changes.