Operational Features
41-001343-02 REV05 – 07.2014 5-26
Setting Time Server Using the Aastra Web UI
Use the following procedure to set the Time Server and optionally set the IP Address of Time Servers 1, 2, and/or 3.
Aastra Web UI
1. Click on Basic Settings->Preferences->Time and Date Setting.
To enable/disable Time Server:
2. The “NTP Time Server” field is enabled by default. If you need to disable the Time Server, uncheck the box. The Time Server 1, 2, and 3 fields
are grayed out when disabled.
To set Time Server 1, 2, and/or 3:
3. Note:
The “Time Server” field must be enabled to enter values in the “Time Server 1, 2, and 3” fields.
In the “Time Server 1”, “ Time Server 2”, and/or “Time Server 3” field(s), enter the IP address of the Time Server 1, 2, and/or 3 in your net-
work, in dotted decimal format.
For example, 132.234.5.4
4. Click Save Settings to save your changes.
To Next Page
Loading...
