Operational Features
5-93 41-001343-02 REV05 – 07.2014
Ring Tone via Speaker During Active Calls
The parameter “ring audibly enable” can be used to configure the IP phones to play the ring tone of an incoming call
via the phone’s speaker while in an active call or if a user is in the process of dialing out.
With the parameter enabled, if a user is in an active call on an extension, and the phone receives a call for the same or dif-
ferent extension, the incoming call will be represented by the call’s ring tone being played through the speaker as well as
the respective line’s LED flashing. This is also the case if a user is in the process of dialing out to a remote number and the
6.
Use the
5 and 2 keys to scroll through and choose the desired tone set.
Valid values are Australia, Brazil, Canada, Europe, France, Germany, Italy, Italy2, Malaysia, Mexico, Brazil, Russia, Slovakia, UK, and US.
Default is US.
7. Press the Save softkey to save your changes.
Aastra Web UI
1. Click on Basic Settings->Preferences.
For global configuration:
2. In the "Ring Tones" section, select a country from the "Tone Set" field.
Valid values are Australia, Brazil, Canada, Europe, France, Germany, Italy, Italy2, Malaysia, Mexico, Brazil, Russia, Slovakia, UK, and US.
Default is US
3. Select a value from the "Global Ring Tone" field.
Note:
See the “Ring Tone Settings Table” on page5-89 for valid values.
For per-line configuration:
4. In the "Ring Tone" section, select a line for which you want to set ring tone.
5. Select a value from the "LineN" field.
Note:
See the “Ring Tone Settings Table” on page5-89 for valid values.
6. Click Save Settings to save your changes.
IP Phone UI
To Next Page
Loading...
