Operational Features
5-153 41-001343-02 REV05 – 07.2014
2. In the “Value” field, enter in the call URI and voicemail URI separated by a semi-colon, as per the following syntax: [call URI];[voicemail URI].
For example, +33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
Notes:
As the example above illustrates, pauses and DTMF are supported for the call URI.
Ensure that no spaces are added between the call URI and the voicemail URI when defining the key value.
If only one URI is provided, the value will be used for the voicemail URI and the call URI will be left as undefined.
3.
In the “Line” field, press the or to select a line for which to apply to the softkey. Valid values are 1 through 9.
4. Press <Save> to save the softkey. The softkey applies to your phone immediately and displays on your idle screen.
5.
Press the to return to the previous menu or press the key to return to the idle screen.
IP Phone UI
To Next Page
Loading...
