Advanced Operational Features
6-18 41-001343-02 REV05 – 07.2014
Configuring TLS Using the Configuration Files
You use the following parameters to configure TLS in the configuration files:
• sip transport protocol
• sips persistent tls
• sip persistent tls keep alive
• sip send sips over tls
• sips root and intermediate certificates
• sips local certificate
• sips private key
• sips trusted certificates
Configuration Files
For the specific parameters you can set in the configuration files for setting TLS, see Appendix A, the section, “Transport Layer Security (TLS) Settings”
on pageA-89.
To Next Page
Loading...
