Aastra 6730I - RTCP Summary Reports

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-37
RTCP Summary Reports
Global Parameters
Parameter –
qos eth port 1 priority
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the priority value used for passing VLAN packets through to a PC via Port 1.
Format Integer
Default Value 0
Range 0 to 7
Example qos eth port 1 priority: 3
Parameter –
sip rtcp summary reports
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies whether or not to send of RTCP summary reports.
Note:
You must restart the phone after setting a value for this parameter.
Format Boolean
Default Value 0
Range 0 (disabled - OFF)
1 (enabled - ON)
Example sip rtcp summary reports: 1
Parameter –
sip rtcp summary report collector
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the hostname server for which to send (collect) the RTCP summary reports.
Note:
You must restart the phone after setting a value for this parameter.
Format <username>@<server>
Note:
Hostname/server string must not exceed 128 characters in length.
Default Value Not Applicable
Range Not Applicable
Example sip rtcp summary report collector: collector@example.org