Aastra 6730I - Page 644

Operational, Basic, and Advanced Parameters
A-38 41-001343-02 REV05 – 07.2014
Line Parameters
Parameter –
sip rtcp summary report collector port
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the port address of the hostname server receiving the RTCP summary reports.
Note:
You must restart the phone after setting a value for this parameter.
Format Integer
Default Value 0
Range 0 to 65536
Example sip rtcp summary report collector port: 5060
Parameter –
sip lineN rtcp summary reports
(N is a line number from 1 to 9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables/disables the specified line number on the phone for which to send the RTCP sum-
mary reports.
Note:
You must restart the phone after setting a value for this parameter.
Format Boolean
Default Value 0 (disabled)
Range 0 (disabled)
1 (enabled)
Example sip line1 rtcp summary reports: 1
Parameter –
sip lineN rtcp summary report
collector
(N is a line number from 1 to 9)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Per-line parameter specifying the hostname of the server receiving the RTCP summary
reports.
Note:
You must restart the phone after setting a value for this parameter.
Format <username>@<server>
Note:
Hostname/server string must not exceed 128 characters in length.
Default Value Not Applicable
Range Not Applicable
Example sip line1 rtcp summary report collector: collector@example.org