Aastra 6730I - Page 652

Operational, Basic, and Advanced Parameters
A-46 41-001343-02 REV05 – 07.2014
Parameter –
time server1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The primary time server's IP address or qualified domain name. If the time server is ena-
bled, the value for time server1 will be used to request the time.
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 42.
Format IP address or qualified domain name
Default Value 1.aastra.pool.ntp.org
Range Not Applicable
Example time server1: 192.168.0.5
Parameter –
time server2
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The secondary time server's IP address or qualified domain name. If the time server is
enabled, and the primary time server is not configured or cannot be accessed the value
for time server2 will be used to request the time.
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 42.
Format IP address or qualified domain name
Default Value 2.aastra.pool.ntp.org
Range Not Applicable
Example time server2: 192.168.0.5
Parameter –
time server3
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The tertiary time server's IP address or qualified domain name. If the time server is ena-
bled, and the primary and secondary time servers are not configured or cannot be
accessed the value for time server3 will be used to request the time.
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 42.
Format IP address or qualified domain name
Default Value 3.aastra.pool.ntp.org
Range Not Applicable
Example time server3: 192.168.0.5