Aastra 6730I - Page 654

Operational, Basic, and Advanced Parameters
A-48 41-001343-02 REV05 – 07.2014
Absolute Time
Parameter –
dst minutes
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The number of minutes to add during Daylight Saving Time. Valid values are a positive
integer between 0 to 60.
Format Integer
Default Value Not Applicable
Range 0-60
Example dst minutes: 60
Parameter –
dst [start|end] relative date
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies how to interpret the start and end day, month, and week parameters - abso-
lute (0) or relative (1).
Format Boolean
Default Value Not Applicable
Range 0 (absolute)
1 (relative)
Example dst [start|end] relative date: 1
Parameter –
dst start month
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The month that DST starts. Valid values are 1 to 12 (January to December).
Format Integer
Default Value Not Applicable
Range 1 (January)
2 (February)
3 (March)
4 (April)
5 (May)
6 (June)
7 (July)
8 (August)
9 (September)
10 (October)
11 (November)
12 (December)
Example dst start month: 7