Aastra 6730I - Page 657

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-51
Parameter –
dst start week
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The week in the specified month in which DST starts. Valid value is a positive or nega-
tive integer from 1 to 5.
Format Integer
Default Value Not Applicable
Range 1 = first full week of month
-1 = last occurrence "dst start day" in the month
2 = second full week of month
-2 =second last occurrence "dst start day" in the month
3 = third full week of month
-3 =third last occurrence "dst start day" in the month
4 = fourth full week of month
-4 = fourth last occurrence "dst start day" in the month
5 = fifth full week of month
-5 = fifth last occurrence "dst start day" in the month
Example dst start week: 1
Parameter –
dst end week
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The week in the specified month in which DST ends. Valid value is a positive or negative
integer from 1 to 5.
Format Integer
Default Value Not Applicable
Range 1 = first full week of month
-1 = last occurrence "dst start day" in the month
2 = second full week of month
-2 =second last occurrence "dst start day" in the month
3 = third full week of month
-3 =third last occurrence "dst start day" in the month
4 = fourth full week of month
-4 = fourth last occurrence "dst start day" in the month
5 = fifth full week of month
-5 = fifth last occurrence "dst start day" in the month
Example dst end week: 5