Aastra 6730I - Page 762

Operational, Basic, and Advanced Parameters
A-156 41-001343-02 REV05 – 07.2014
Parameter–
sprecode
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the code to enter before entering the extension for where you want to park an
incoming call. The applicable value is dependant on the type of server in the network:
Server/Park Values**
Asterisk70
Sylantro*98
BroadWorks*68
ININ PBX callpark
**Leave “value” fields blank to disable the static park and pickup feature.
Format Alphanumeric characters
Default Value <Blank>
Range See applicable values in table above.
Example sprecode: *68
Parameter–
pickupsprecode
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the code to enter before entering the extension for where you want to pickup a
parked call. The applicable value is dependant on the type of server in the network:
Server/Pickup Values**
Asterisk70
Sylantro*99
BroadWorks*88
ININ PBX pickup
**Leave “value” fields blank to disable the static park and pickup feature.
Format Alphanumeric characters
Default Value <Blank>
Range See applicable values in table above.
Example pickupsprecode: *88