Administrator Level Options
3-6 41-001343-02 REV05 – 07.2014
Aastra Web UI Options
An Administrator can configure specific options using the Aastra Web UI. These options display after an Administrator
logs into the Web UI using a Web browser and entering the Admin username and password at the login prompt (The
default username is "admin" and the default password is "22222". The IP phones accept numeric passwords only.) The
column on the left side of the screen indicates the configurable options. A User has limited configuration options as
shown in the following illustrations.
The following are options that an Administrator can configure in the Aastra Web UI (and are not available for the User to
configure):
• Operation->Reset
– Restore to Factory Defaults
– Remove Local Configuration Settings
• Basic Settings->Preferences->General
– Local Dial Plan
– Send Dial Plan Terminator
– Digit Timeout (seconds)
• Basic Settings->Preferences->Outgoing Intercom Settings (User can configure this via the Aastra Web UI if ena-
bled by an Administrator)
Administrator Web UI Menu
User Web UI Menu
To Next Page
Loading...
