10 Model 6731i IP Phone Installation Guide
Installation and Setup
Connecting to the Network and to Power
Power Adapter
Use the power adapter (sold separately and provided by your System
Administrator) with your phone and plug your phone into a power source.
Inline Power Provided
If your network provides 802.3af compliant in-line power, the phone is
powered through the network.
1. On the top of your phone, connect the Ethernet cable (provided with
your phone) into the network port marked with
LAN.
2. Plug the other end of the Ethernet Cable directly into the network jack
on the wall.
Et h e r n e t
Cable
Net work Jack
(if Inline power provided,
do not install the power adapter)
To Net wo rk
To Next Page
Loading...
