Line Keys and Softkeys
105 41-001452-00 Rev 00 – 07.2011
Configuring an Intercom Key
Use the following procedure to configure a Callers List key on the 6737i IP Phone. The procedure shows the top softkeys
screen as an example.
Aastra Web UI
Note:
By default, the Intercom key is Key 4 on the Top Softkeys.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select Intercom.
4. In the "Label" field, enter a label to apply to this key.
5. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
7. In the "Type" field, select Intercom.
8. (M675i) In the "Label" field, enter a label to apply to this key.
9. Click Save Settings.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
To Next Page
Loading...
