Aastra 6737i - Page 45

Customizing Your Phone
41-001452-00 Rev 00 – 07.2011 38
Set Time Servers
With a valid time server enabled your IP phone will synchronize the time displayed with the specified configuration server.
The phone will use the time from Time Server 1 unless it is not configured or unavailable, in which case it will move on to
Time Server 2, and if neccessary Time Server 3
1. Select Preferences.
2. Select Time and Date.
3. Select Time Server.
4. Select from Time Server 1, Time Server 2, or Time Server 3.
5. Enable the time server if required using the "Enable" key.
Note:
The default for Time Servers is Enabled.
6. Using the keys on the keypad, enter an IP address or domain name for the time server.
Use the "Backspace" key to move back a space and delete a character. Use the "Dot" softkey to enter dots within the
IP address or domain name. Use the "123" softkey to toggle between entering numbers and entering letters.
7. Press Done to save the time server setting
Time and Date
Done -
- Select
1. Time Zone
2. Daylight Savings
3. Time Format
4. Date Format
5. Time Server
6. Set Time
7. Set Date
Time Server 1
Done -
- 123
Time Server Address:
Network Time Disabled
Cancel -
Enable -
Time Server 1
Done -
- Backspace
- Dot “ . ”
- 123
Time Server Address:
0.0.0.0
Cancel -
Disable -
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846