Aastra 6753I - Language Packs; Configuration Complete; Idle State Display; Incomplete Configuration

___________________________________________________________________________________________
CS AASTRA 6753i IP PHONE USER GUIDE AASTRA – 2786-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 20 OF 86
Do not unplug or remove power from the phone while it is restarting.
3.2.2 Language Packs
If language packs were loaded to your phone by your System Administrator, the following screen
displays during startup.
Language packs…
Downloading
3.2.3 Configuration Complete
When the configuration update is complete, the phone displays the following screens:
Network
DSP
SIP
Done
3.2.4 Idle State Display
The idle state screen displays when your 6753i startup process is completed.
Fri Sep 9 10:07
John Smith
1
Line Appearance Number
3.2.5 Incomplete Configuration
If your phone displays an "Incomplete Config" message without any extension or user name at the
end of the start-up sequence instead of an Idle state screen, this indicates the phone configuration
that was downloaded from the configuration server is not complete or correct. Contact your System
Administrator for assistance.