Aastra 6753I - Park and Pickup

___________________________________________________________________________________________
CS AASTRA 6753i IP PHONE USER GUIDE AASTRA – 2786-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 53 OF 86
Step
Action
Result
5.
Press the Conf key again.
 The conference is established.
 A list of the other two parties in the
conference displays on the
originator’s screen.
2.1001
1.John Smith
1
Drop
Leave
If you do not wish to add the second party to the conference:
1.
Press Cancel while the second party’s
phone is ringing.
You are reconnected to the first party.
Drop the second party after consultation without establishing a conference:
1.
After consulting with the second party:
Press Drop.
The first party remains on hold.
2.
 Press the Line key.
Or
 Press the Hold key.
You are reconnected to the first party.
Drop a party from an active conference:
1.
Use or to point to the party to drop.
You remain connected to the other party.
2.
Press Drop.
Conference two separate calls already on hold:
1.
Press Conf.
Both calls are on hold.
2.
Press the Line key of the first held call.
The first line is connected.
3.
Press Conf again.
4.
Press the Line key of the second held
call.
The conference is established.
6.6 Park and Pickup
The Call Park feature allows you to park a call so that any member of the group can retrieve it.
A call can be parked against any number in the group, including your own number.
You can only have one call parked at a time.
A 45-second timer is started when you park a call. If the timer expires and your line is idle, the
system rings your line. If you line is not idle, the timer is restarted for 10 seconds and the call
remains parked. This procedure is repeated until your line is idle, or the parked call is retrieved or
released.